Makes grants to address the most serious social and environmental problems facing society, where risk capital, responsibly invested, may make a difference over time.
An independent federal agency created by Congress in 1950 to promote the progress of science.
King Saud University seeks to become a leader in educational and technological innovation, scientific discovery and creativity through fostering an atmosphere of intellectual inspiration and partnership for the prosperity of society.
Normal Modes
See simulatsioon pole veel sellesse keelde tõlgitud. Ingliskeelne versioon on saadaval allpool.
Lae alla
Mängi kohe!
540 kB
Versioon: 1.01 (muuda logi)
Manusta
Manusta selle simulatsiooni töötav koopia Kasuta seda HTML koodi, et manustada selle simulatsiooni töötav koopia. Manustatud simulatsiooni kõrgust ja laiust saab muuta HTML koodi vastavate atribuutidega. Manusta pilt, mis vajutuse peale simulatsiooni avab Kasuta seda HTML koodi, et näidata ekraanipilti koos sõnadega ,,Vajuta, et mängida". |
Play with a 1D or 2D system of coupled mass-spring oscillators. Vary the number of masses, set the initial conditions, and watch the system evolve. See the spectrum of normal modes for arbitrary motion. See longitudinal or transverse modes in the 1D system. |
Õppematerjalid
Põhiteemad
- Oscillator
- Normal Modes
- Polarization
- Mass Spring System
- Frequency
- Amplitude
- Phase
Näidis-õpieesmärgid
- Explain what a normal mode is.
- Explain what are the frequency, the amplitude, and the phase of a normal mode.
- Explain why different normal modes have different frequencies and why higher-numbered modes have higher frequencies.
- Identify how many normal modes a given system has and be able to sketch the individual modes qualitatively, for both 1D and 2D systems.
- Explain the distinction between transverse and longitudinal normal modes in a 1D system.
- Explain how adjusting the phase of a normal mode affects the motion of the system.
- Explain qualitatively how any arbitrary state of the system can be written as a sum of normal modes; that is, explain the superposition principle.
- Explain which properties of the system are set by the initial conditions, which properties are time-independent, and which properties are time-dependent.
- Explain why striking a metal plate in one spot raises the temperature of the plate.
Nõuandeid õpetajatele
Ideed õpetamiseks
Sa võid lisada oma ideid ja tegevusi.
Seotud simulatsioonid
Tõlgitud versioonid:
Nõudmised tarkvarale
| Windows | Macintosh | Linux |
|---|---|---|
|
Microsoft Windows
XP/Vista/7 Macromedia Flash 9 or later |
OS 10.5 or later
Macromedia Flash 9 or later |
Macromedia Flash 9 or later |
Tunnustus
| Kujundajad | Kolmandate osapoolte materjalid | Täname |
|---|---|---|
|